Induskart Engitech LLP
Induskart Engitech LLP
Haripura, Vadodara, Gujarat
SEND SMS
SEND EMAIL

Mechanical Anchors Fasteners

Providing you the best range of fbn ii fischer mechanical anchor, ftr fischer chemical anchor threaded rod, fischer high performance steel anchor fh ii, fischer high performance steel anchor faz ii, hilti expansion anchor and rgm fischer chemical anchor threaded rod with effective & timely delivery.

FBN II Fischer Mechanical Anchor

FBN II Fischer Mechanical Anchor
  • FBN II Fischer Mechanical Anchor
Get Best Quote
Approx. Price: Rs 25 / PieceGet Latest Price

Product Details:

Drill Hole diameter10 mm
Min drill hole depth for through fixings63 mm
Anchor length71 mm
ThreadM 10 x 31 mm
BrandFischer
Width Across Nut17 mm

Approved for:
  • Concrete C20/25 to C50/60, non-cracked

Also suitable for:
  • Concrete C12/15
  • Natural stone with dense structure

Note: You can find detailed information on building materials in the registration document

Permission:

  • ETA-07/0211
  • DoP No. 0015
  • DoP No. 0756-CPD-0296
Request
Callback
Yes! I am Interested

FTR Fischer Chemical Anchor Threaded Rod

FTR Fischer Chemical Anchor Threaded Rod
  • FTR Fischer Chemical Anchor Threaded Rod
Get Best Quote
Approx. Price: Rs 25 / PieceGet Latest Price

Product Details:

MaterialSS
Length160mm
Fixing TypeThreaded Rod
ColourSilver
Head TypeHex Nut
Diameter12mm
Suitable ForConcrete Stone
FinishZinc Plated
Bolt SizeM12

Building materials:

Suitable for:

  • Concrete C12/15, non-cracked
  • Natural stone with dense structure

Advantages:
  • The fixing system comprising threaded rod FTR or internal threaded anchor FIS E and one of the injection mortars FIS V, FIS EM, FIS SB or FIS P can be individually selected based on requirements, thus allowing for a wide range of applications.
  • The wide range of approved threaded rods FTR from M10 to M30 allows for various applications

Functioning:
  • The system can be used with any of the following injection mortars: FIS V, FIS VS, FIS VW, FIS VT, FIS EM, FIS SB. FIS P can be used but does not have approvals.
  • FIS E is suitable for pre-positioned installation, whilst FTR is suitable for pre-positioned and push-through installation.
  • The mortar bonds the entire surface of the anchor with the drill hole wall and seals the drill hole.
  • The anchor is set manually, by lightly rotating it until it reaches the drill hole base.
  • In general, it is also possible to use the FIS H K anchor sleeves in solid brick masonry, and this provides additional safety when the base material is unknown

Applications:
  • Gratings
  • Gates
  • Handrails
  • Consoles
  • Pipelines
  • Sanitary equipment
  • Awnings
  • Canopies
  • Satellite antennas
  • Sun protection
Request
Callback
Yes! I am Interested

Fischer High Performance Steel Anchor FH II

Fischer High Performance Steel Anchor FH II
  • Fischer High Performance Steel Anchor FH II
Get Best Quote
Approx. Price: Rs 45 / PieceGet Latest Price

Product Details:

Drill Hole diameter12 mm
Min drill hole depth for through fixings110 mm
Anchor length120 mm
ThreadM 12 x 71 mm
BrandFischer
Width Across Nut19 mm

The push-through anchor for fixings with sophisticated design in cracked concrete

Advantages:
  • The anchor design allows for wide-ranging head shapes for fixing points with sophisticated design.
  • The ideal interaction of screw shank and sleeve allows for a high shear load. Thus fewer fixing points are required.
  • The international approvals guarantee maximum safety and the best performance. These applications are also approved for use in earthquake zones (seismic C1).
  • The optimised geometry reduces the energy required for assembly.
  • The approval regulates the use of hollow drills.
  • When using hollow drills with suction, drill hole cleaning is not required.

Applications:
  • Guard rails
  • Staircases
  • Consoles
  • Steel constructions
  • Ladders
  • Cable trays
  • Machines
  • Gates
  • Facades
  • Gratings

Approved for:
  • Concrete C20/25 to C50/60, cracked and non-cracked

Also suitable for:
  • Concrete C12/15
  • Natural stone with dense structure
You can find detailed information on building materials in the registration document.

Permission:
  • ETA-07/0025
  • DoP No. 0756-CPD-0295
  • No. 0020 - EN
  • ESR-2691

Functioning:
  • The FH II is suitable for push-through installation.
  • When applying the torque, the cone is pulled into the expansion sleeve and expands it against the drill hole wall.
  • The black plastic ring prevents rotation when tightening the anchor, and acts as a crumple zone to take the torque slippage so that the fixture is pulled onto the anchor base.
  • Available head shapes for flexible design solutions:
    Countersunk head (type SK), hexagon head (type S), bolt version with nut and washer (type B) and cap nut (type H).

Request
Callback
Yes! I am Interested

Fischer High Performance Steel Anchor Faz II

Fischer High Performance Steel Anchor Faz II
  • Fischer High Performance Steel Anchor Faz II
Get Best Quote
Approx. Price: Rs 25 / PieceGet Latest Price

Product Details:

Drill Hole diameter12 mm
Anchor length120 mm
Min drill hole depth for through fixings110 mm
ThreadM 12 x 71 mm
Width across nut19 mm
Model NumberFaz II

The fischer bolt anchor FAZ II is the steel anchor for the most demanding requirements. Heavy loads are fixed into cracked concrete with the steel anchor. Due to the two anchorage depths and simple mounting, the FAZ II can be used in a particularly flexible manner. The proven expansion clip feeds the loads into the concrete in an especially secure manner and ensures maximum load-bearing properties. The zinc-plated steel version is used to fix loads in indoor areas. The steel anchor is, for example, suitable for fixing railings, cable trays and consoles.

Features
  • One anchor - two anchorage depths Reduced anchorage depths save time and costs during drilling.
  • With expansion clip for maximum load-bearing capacity. Thus fewer fixing points and smaller anchor plates are required. This saves time and costs.
  • Minimum torque slippage Simple assembly saves time as well as wear and tear.
  • With approval for cracked concrete and fire inspection maximum safety.

 

Specification

ETA-approval




ICC-approval




Seismic-Approval


C1 / C2


Max. usable length hef,max./hef,min.

tfix

20/40

[mm]

Sales unit


20

[pcs]



20


GTIN (EAN Code)


4006209954201


Request
Callback
Yes! I am Interested

HILTI Expansion Anchor

HILTI Expansion Anchor
  • HILTI Expansion Anchor
Get Best Quote
Approx. Price: Rs 55 / PieceGet Latest Price

Product Details:

MaterialSS
Length205 mm
Thread8.8 with rolled
Head TypeHex Head
ApplicationsFastening heavy loaded,Columns,Machines

Key technical data
  • Type of fixingThrough-fastening
  • Environmental conditionsIndoor, dry conditions
  • Head configurationHex head

Features
  • High tension and shear load capacities
  • Force-controlled expansion which allows follow-up expansion
  • Wide range of sizes and configurations for multiple applications
  • Collapsible black plastic section prevents anchor turning in hole during setting and provides reliable clamping of part fastened to overcome gaps
  • ICC-ES/AC 193 for cracked and uncracked concrete and seismic

Applications
  • Heavy-duty fastenings in high safety-relevant or dynamic applications, including applications in nuclear power plants
  • Applications where extensive approval back-up or technical back-up is required, e.g. machines, heavy equipment, steel columns, heavy pipe supports, pumps, beam supports, medical equipment, cantilevers, cranes, car hoists, etc.
  • Heavy-duty applications, e.g. machines, heavy equipment, steel columns, heavy pipe supports, pumps, beam supports, medical equipment, cantilevers, cranes, car hoists, etc.
Request
Callback
Yes! I am Interested

RGM Fischer Chemical Anchor Threaded Rod

RGM Fischer Chemical Anchor Threaded Rod
  • RGM Fischer Chemical Anchor Threaded Rod
Get Best Quote
Approx. Price: Rs 35 / PieceGet Latest Price

Product Details:

BrandFischer
MaterialZinc Plated Steel
Drill Hole Diameter10 mm
Product TypeResin Anchors
Anchor Length80 mm

Advantages:
  • The extensive range of RG M from M8 - M30 opens up a wide range of applications and therefore offers great flexibility.
  • The wide range of approved steel types for RG M allows for use in all corrosion resistance classes and offers the best possible application safety.


Permission:

  • ETA-02/0024
  • DoP No. 0007
  • DoP No. 0007 - EN
  • DoP No. 0072
  • DoP No. 0094
  • DoP No. 0094 - EN
  • DoP No. 0756-CPD-0300
  • DoP No. 0756-CPD-0301
  • DoP No. 0756-CPD-0490

Functioning:
  • The threaded rod RG M is set using a hammer drill and the accompanying setting tool in rotating and hitting motions.
  • During setting, the oblique edge of the RG M destroys the capsule, and mixes and activates the mortar.

Request
Callback
Yes! I am Interested

FWA Fischer Wedge Anchor

FWA Fischer Wedge Anchor
  • FWA Fischer Wedge Anchor
Get Best Quote
Approx. Price: Rs 25 / PieceGet Latest Price

Product Details:

Size8 x 65
MaterialSS
Hexagon Nut3 mm
Suitable ForConcrete C12/15

Wedge Anchor FWA:
  • The cost-efficient fixing for flexible use in non-cracked concrete

Applications:
  • Steel constructions
  • Guard rails
  • Consoles
  • Ladders
  • Cable trays
  • Machines
  • Staircases
  • Gates
  • Facades

Versions:
  • Zinc-plated steel

Suitable for:

  • Concrete C20/25
  • Natural stone with dense structure

Advantages:
  • The standard anchorage depth achieves the maximum load-bearing capacities. Thus fewer fixing points and smaller anchor plates are required.
  • The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility.
  • The long thread balances component tolerances and allows for stand-off installations, thus increasing flexibility.
  • Few hammer blows and the minimal torque slippage allow for a noticeably simpler installation.
  • The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the attachment.

Functioning:
  • The FWA is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions.
  • Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut).
  • When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall.
  • The head embossing offers a simple control of the anchoring.
  • In the case of series installation, we recommend using the FABS setting tool.


Product Overview:

    TypeArt.-No.ThreadDrill diameterAnchor length


    [Inch] [Inch] [Inch]





    FWA 1/4 x 2-1/40489361/41/42 1/4
    FWA 3/8 x 2-1/40489443/83/82 1/4
    FWA 3/8 x 30489463/83/83
    FWA 3/8 x 3-3/40489483/83/83 3/4
    FWA 3/8 x 50489503/83/85
    FWA 1/2 x 3-3/40489921/21/23 3/4
    FWA 1/2 x 4-1/40489951/21/24 1/4
    FWA 1/2 x 5-1/20489961/21/25 1/2
    FWA 1/2 x 70490131/21/27
    FWA 5/8 x 3-1/20490225/85/83 1/2
    FWA 5/8 x 4-1/20490255/85/84 1/2
    FWA 5/8 x 50490265/85/85
    FWA 5/8 x 60490315/85/86
    FWA 5/8 x 100490815/85/810
    FWA 5/8 x 8-1/20490805/85/88 1/2
    FWA 3/4 x 4-1/40490843/43/44 1/4
    FWA 3/4 x 5-1/20490863/43/45 1/2
    FWA 3/4 x 6-1/40490873/43/46 1/4
    FWA 3/4 x 100490953/43/410
    FWA 3/4 x 120491073/43/412
    Request
    Callback
    Yes! I am Interested

    HILTI Pre-Set Undercut Anchor

    HILTI Pre-Set Undercut Anchor
    • HILTI Pre-Set Undercut Anchor
    Ask For Price
    Product Price :Get Latest Price

    Product Details:

    MaterialSteel & zinc-plated
    Model No.HDA-P M16x190/40
    Head ConfigurationExternally threaded
    BrandHILTI
    Fire ResistanceYes
    Material CompositionBolt steel,8.8 grade,zinc-plated (min. 5 um)
    Washer Size45 mm
    Anchor Length275 mm
    Type Of FasteningPre-fastening
    IBC ComplianceIBC 2003,IBC 2006,IBC 2009,IBC 2012
    Base Plate Clearance Hole18 mm
    Standard Embedment Depth190 mm
    Wrench Size24 mm
    Required Tightening Torque120 Nm
    Drill Bit Diameter30 mm
    Seismic LoadingYes
    Fatigue LoadingYes

    Features:
    • Self-undercutting facilitates fast and reliable installation without need for a separate undercutting tool or additional operations
    • The resulting keying effect provides a secure hold even in cracked concrete under dynamic loading
    • Manufactured under an NQA-1 nuclear quality assurance program with comprehensive approvals
    • Close spacing and small edge distances thanks to low expansion forces
    • Completely removable if necessary

    Applications:
    • Safety-relevant, heavy-duty fastenings for all dynamic loading (shock, seismic and fatigue) in cracked or uncracked concrete, including applications in nuclear power plants
    • Fastenings to support heavy pipes, safety barriers, industrial machines, crane rails, dorm structures, crash barriers, roof fixings, elevator tracks, bridge retrofitting etc.

    Technical Data:

    • Additional product information: Meets approval requirements when installed using the specified stop drill bit, setting tool and rotary hammer
    • Leadership in energy and environmental design:Yes
    • PROFIS software:Yes
    • Thickness fastened - min. : 0 mm
    • Fatigue loading: Yes
    • Installation direction: All
    Request
    Callback
    Yes! I am Interested

    Chemical Anchor Stud Stainless Steel Fasteners

    Chemical Anchor Stud Stainless Steel Fasteners
    • Chemical Anchor Stud Stainless Steel Fasteners
    Get Best Quote
    Approx. Price: Rs 245 / PieceGet Latest Price
    What is a Chemical Anchor? "Chemical or resin anchors are generic terms relating to steel studs, bolts and anchorages which are bonded into a substrate, usually masonry and concrete, using a resin based adhesive system
    Request
    Callback
    Yes! I am Interested

    HILTI Torque Controlled Expansion Anchor

    HILTI Torque Controlled Expansion Anchor
    • HILTI Torque Controlled Expansion Anchor
    Ask For Price
    Product Price :Get Latest Price

    Product Details:

    MaterialSteel
    ColorSilver
    Fire ResistanceYes
    Washer Size45 mm
    Anchor Length275 mm

    Features
    • Special safety cap ensures that the correct installation torque is always applied even without using a torque wrench
    • High tensile and shear load capacity
    • Force-controlled expansion which allows follow-up expansion
    • ETA Option 1 for cracked and uncracked concrete
    • Suitable for dynamic loading including fatigue, seismic and shock

    Applications
    • Heavy-duty fastenings in highly safety-relevant or dynamic applications, including applications in nuclear power plants
    • Applications where extensive approval back-up or technical back-up is required, e.g. machines, heavy equipment, steel columns, heavy pipe supports, pumps, beam supports, medical equipment, cantilevers, cranes, car hoists, etc.

    Technical Data
    • Environmental conditions Indoor, dry conditions
    • Material composition Steel, zinc-plated (min. 5 m) , Bolt steel, 8.8 grade, zinc-plated (min. 5 m)
    • Material, corrosion Steel, zinc-plated
    • Head configuration Safety cap (torque cap)
    • Type of fastening Through-fastening
    • Leadership in energy and environmental design Yes
    • Tested/approved for diamond drilling Yes
    • Additional product information Manufactured under a Nuclear Quality Assurance Program according to ASME NQA-1 and 10CFR50 App B

    Key technical data
    • Environmental conditionsIndoor, dry conditions
    • Material compositionSteel, zinc-plated (min. 5 m), Bolt steel, 8.8 grade, zinc-plated (min. 5 m)
    • Material, corrosionSteel, zinc-plated

    Features

    • Special safety cap ensures that the correct installation torque is always applied even without using a torque wrench
    • High tensile and shear load capacity
    • Force-controlled expansion which allows follow-up expansion
    • ETA Option 1 for cracked and uncracked concrete
    • Suitable for dynamic loading including fatigue, seismic and shock

    Applications
    • Heavy-duty fastenings in highly safety-relevant or dynamic applications, including applications in nuclear power plants
    • Applications where extensive approval back-up or technical back-up is required, e.g. machines, heavy equipment, steel columns, heavy pipe supports, pumps, beam supports, medical equipment, cantilevers, cranes, car hoists, etc.

    Technical Data
    • Environmental conditions Indoor, dry conditions
    • Material composition Steel, zinc-plated (min. 5 m) , Bolt steel, 8.8 grade, zinc-plated (min. 5 m)
    • Material, corrosion Steel, zinc-plated
    • Head configuration Safety cap (torque cap)
    • Type of fastening Through-fastening
    • Leadership in energy and environmental design Yes
    • PROFIS softwareYes
    • Tested/approved for diamond drilling Yes
    • Additional product information Manufactured under a Nuclear Quality Assurance Program according to ASME NQA-1 and 10CFR50 App B
    • Fire resistance Yes
    Request
    Callback
    Yes! I am Interested

    Fischer Drop Bullet Anchor

    Fischer Drop Bullet Anchor
    • Fischer Drop Bullet Anchor
    Get Best Quote
    Approx. Price: Rs 35 / PieceGet Latest Price

    Product Details:

    BrandFischer
    MaterialSS
    ThreadM10
    Anchor size30 mm

    Request
    Callback
    Yes! I am Interested

    Full Sleeve Concrete Anchor

    Full Sleeve Concrete Anchor
    • Full Sleeve Concrete Anchor
    Ask For Price
    Product Price :Get Latest Price

    Product Details:

    MaterialSS
    Rust ResistantYes
    Diameter3/4"
    Overall Length5"
    Head TypeHex Nut

    Request
    Callback
    Yes! I am Interested

    Frame Fixing Nylon Anchor

    Frame Fixing Nylon Anchor
    • Frame Fixing Nylon Anchor
    Ask For Price
    Product Price :Get Latest Price

    Product Details:

    MaterialNylon,Steel
    Diameter6 mm
    Length35 mm
    Weight LBS0.01

    Request
    Callback
    Yes! I am Interested
    X

    Explore more products



    Reach Us
    Hitesh Toshniwal (Partner)
    Savorite Complex, 2nd Floor, Near Manisha Circle
    Haripura, Vadodara- 390020, Gujarat, India



    Call Us

    Share Us

    F GT L


    Send E-mailSend SMS